How to Use the Spray Booth

/

Glazing Methods

  • Dipping

  • Brushing or Sponging

  • Using Applicator Bottle

  • Spraying!

How to use the Spray Booth

  • Watch the video below (or here on YouTube). Anika walks you through the whole process, including cleanup. While this is filmed at RCC, the process at RCS is the same!

  • Book a time slot to use the spray booth! This is not the same as a normal glazing appointment. Since only one person can use it at once, this is important!

  • You absolutely MUST wear a respirator to spray glaze. Glaze particles are not good for us to breathe!

  • Consider dipping a layer first. Often spraying a layer of glaze over a dipped layer of glaze gives a nice variation.

  • It can be challenging to gauge the thickness of sprayed glaze. Practice will help!

  • When spraying, slowly turn your project on the banding wheel while keeping the sprayer about 10” away from the object.

  • Clean up! Wash the sprayer and spray clean water through it when you are finished.

Recommended Masks

KN95 disposable masks are okay, but a Reusable 3M Respirator is best. Invest in your health!